The readout actuator pin prompts the automatic switching of the alphanumeric V/cm waveform scaling information on oscilloscopes with an on-screen display, or illuminates a x10 indicator on earlier RA capable oscilloscopes.
This high impedance oscilloscope probe is designed and calibrated for use on instruments with an input impedance of 1 Mohm shunted by 18 pF. However, the TEX200RA can be low-frequency adjusted to work with instruments having an input capacitance anywhere between 10 to 35 pF.
Users can further fine-tune the probe by using the two incorporated high-frequency trimming adjustments within the adjustment box near the standard BNC connection.
Accessories include: a hook-tip adapter, a ground-lead clip, a probe compensation adjustment tool, an IC ground sprung adapter, a BNC to probe tip adapter, a spare probe tip, two probe tip caps, and two probe identifier clips, all neatly packaged with the TEX200RA probe in a clear pouch.
$48.00
1-877-TYROSYS
(877-897-6797)
|
X10 Setting
|
|
|
Attenuation Ratio
|
10:1
|
|
Bandwidth
|
DC to 200 MHz
|
|
Rise Time
|
1.75ns
|
|
Input Resistance
|
10 MOhm w/ 1 MOhm oscilloscope input
|
|
Input Capacitance
|
12 pF
|
|
Compensation Range
|
5 to 30 pF
|
|
Working Voltage
|
600 VDC incl. peak AC derating w/ frequency
|
|
General Specifications
|
|
|
Safety
|
IEC-1010
|
|
Cable Length
|
1.2 Meter
|
Tyrosys Corp
406 N. Center Street | Bonham, Texas 75418
Phone: 903-640-4900 | Lobby Hours: 9 am to 6 pm Monday - Friday
Tyrosys Corp is PCI-DSS Compliant
Site content is copyrighted, Tyrosys Corporation © 2002-2012
1-877-897-6797
|
|
 |